3Com Wireless LAN Switch Managed Access Point AP2750

Home > Networking Equipment > 3Com > Wireless Infrastructure >

Our Price: $222.95

Condition: New
Manufacturer: 3Com
Mfr Part: 3CRWX275075A

Availability: Usually Ships in 1 to 2 Business Days
Product Code: VH14930

Qty:

Description

Fit managed access point with single 10/100 Ethernet port and software-configureable radio for IEEE 801.11b/g or 11a operation; to be used with 3Com Wireless Switches and Controllers

Lets Users Connect Securely to the Wireless LAN and Roam
The AP2750 utilizes standards-based integration with the Wireless LAN switch and/or controller for plug-and-play installation. Configuration details for all MAPs are centrally distributed for consistency and accuracy resulting in simplified initial deployments and easier management. Automated network controls at the wireless switch improve MAP coverage and service by optimizing RF gain, assigning radio channels, load balancing and even sweeping the RF environment as required, either continuously or on-demand.

MAP encryption provides for local traffic encryption, and distributes encryption processing across the network, rather than relying on one central device. RF scans can be used not only to locate users, but also to identify and isolate potentially harmful rogue APs or other infiltrators.

Allowing network wiring flexibility, the AP2750 can be linked directly or indirectly to a 3Com Wireless LAN Switch or Controller through existing wired networks, even across Layer 3 boundaries. Additionally, the AP2750 can receive its power via standard PoE (Power over Ethernet) either directly from a Wireless LAN Switch or from any 802.11af compliant PoE device.

Supports 802.11 a or b/g for speeds up to 54 Mbps at distances up to 100 meters (328 feet) for 802.11b/g users, 50 meters or (164 feet) for 802.11a users.

Dual-mode radio allows operation for 802.11a or 802.11b/g and is software configurable from the 3Com Wireless Switch Manager.

Each AP2750 can handle multiple BSSID/SSIDs to appear as multiple access points.

Supports 802.3af-compatible Power over Ethernet (PoE), so data and power are supplied over the same Ethernet cable eliminating the need for power adapters, power cords or AC outlets.

Dual-mode 802.11a and 802.11b/g antennas provide excellent performance and coverage in high multi-path environments and supports a variety of external dual-mode antennas for flexible installation options.

Performs packet encryption over the air for dynamic WEP, TKIP, and AES.

Allows independently encrypted and isolated subnets or VLANs while using the same SSID.

RF multi-band sweep allows any AP2750 can scan the RF environment for both 802.11a and 802.11b/g rogue access points, ad-hoc users, or other RF interferers.

Requires no pre-staging or pre-configuration of access points so new or replacement MAPs inherit configuration information from the wireless LAN switch or controller.

Allows MAPs to be directly and/or indirectly connected to their managing wireless LAN switch and/or controller allowing a wide variety of flexible deployment scenarios.

Optimizes RF cell size and support international requirements with automated transmit power and radio channel assignment.

Provides comprehensive MAP control and management as MAPs are not operational in stand alone mode. All Attributes such as channel number, power level, SSIDs, and security settings are all handled Lets Users Connect Securely to the Wireless LAN and Roam
The AP2750 utilizes standards-based integration with the Wireless LAN switch and/or controller for plug-and-play installation. Configuration details for all MAPs are centrally distributed for consistency and accuracy resulting in simplified initial deployments and easier management. Automated network controls at the wireless switch improve MAP coverage and service by optimizing RF gain, assigning radio channels, load balancing and even sweeping the RF environment as required, either continuously or on-demand.

MAP encryption provides for local traffic encryption, and distributes encryption processing across the network, rather than relying on one central device. RF scans can be used not only to locate users, but also to identify and isolate potentially harmful rogue APs or other infiltrators.

Allowing network wiring flexibility, the AP2750 can be linked directly or indirectly to a 3Com Wireless LAN Switch or Controller through existing wired networks, even across Layer 3 boundaries. Additionally, the AP2750 can receive its power via standard PoE (Power over Ethernet) either directly from a Wireless LAN Switch or from any 802.11af compliant PoE device.

Supports 802.11 a or b/g for speeds up to 54 Mbps at distances up to 100 meters (328 feet) for 802.11b/g users, 50 meters or (164 feet) for 802.11a users.

Dual-mode radio allows operation for 802.11a or 802.11b/g and is software configurable from the 3Com Wireless Switch Manager.

Each AP2750 can handle multiple BSSID/SSIDs to appear as multiple access points.

Supports 802.3af-compatible Power over Ethernet (PoE), so data and power are supplied over the same Ethernet cable eliminating the need for power adapters, power cords or AC outlets.

Dual-mode 802.11a and 802.11b/g antennas provide excellent performance and coverage in high multi-path environments and supports a variety of external dual-mode antennas for flexible installation options.

Performs packet encryption over the air for dynamic WEP, TKIP, and AES.

Allows independently encrypted and isolated subnets or VLANs while using the same SSID.

RF multi-band sweep allows any AP2750 can scan the RF environment for both 802.11a and 802.11b/g rogue access points, ad-hoc users, or other RF interferers.

Requires no pre-staging or pre-configuration of access points so new or replacement MAPs inherit configuration information from the wireless LAN switch or controller.

Allows MAPs to be directly and/or indirectly connected to their managing wireless LAN switch and/or controller allowing a wide variety of flexible deployment scenarios.

Optimizes RF cell size and support international requirements with automated transmit power and radio channel assignment.

Provides comprehensive MAP control and management as MAPs are not operational in stand alone mode. All Attributes such as channel number, power level, SSIDs, and security settings are all handled by the wireless LAN switch or controller for additional security.

Features

Total ports: One 10BASE-T/100BASE-TX integrated 802.3af-compatible PoE port with auto-negotiation
Media interfaces: RJ-45, 802.11a, 802.11b, 802.11g, DB-9
Frequency band: 802.11a: 5 GHz , 802.11b/g: 2.4 GHz
Operating channels: Channel availability depends on local country regulations. Wireless LAN system administrator must choose correct country of operation. Channels are then automatically configured to comply with specified country's regulations
Operating range: 802.11a: up to 50 meters (164 feet) transmit and receive; 802.11b/g: up to 100 meters (328 feet) transmit and receive
Power consumption: 6W maximum (PoE port or external power adapter)
Security: 40/64 and 104/128-bit WEP encryption, TKIP WPA and WPA2 (802.11i/RSN) 64/128-bit AES encryption; multiple broadcast SSID support at the MAP; IEEE 802.1X network login; IEEE 802.11i or 802.1X RADIUS authentication; ACL and VLAN support at the WLAN switch
LEDs: Power, 10/100 Mbps Link status, 802.11a, 11b, or 11g Activity
Dimensions and weight:
Height: 16.6 cm (6.5 in)
Width: 8.3 cm (3.25 in)
Depth: 3.2 cm (1.25 in)
Weight: 200g (7.0 oz)
Management: Central management with Web browser via local console or remotely over SSL or HTTPS; command line interface via local console or remotely over SSH v2 or Telnet; 3Com� Wireless Switch Manager
System Requirements: 3Com� Wireless LAN Switch or Wireless LAN Controller required for MAP operation