3Com MSR 50 Processor Module

Home > Networking Equipment > 3Com > MSR Modules >

Our Price: $3,252.95

Condition: New
Manufacturer: 3Com
Mfr Part: 0231A791

Availability: Usually Ships in 1 to 2 Business Days
Product Code: VH15316

Qty:

Description

Multi-Service Router 50-Series Processor Module

High-Performance Processor Module for the MSR 50 Series Multi-Service Router

The MSR 50 Series Processor Module is the high-performance routing engine for the MSR 50 Series. It provides protocol handling, packet forwarding, interface control and failure detection functions. Status monitoring information, such as fan operation, power supply and system health, is provided by LED indicators on the module.

The Processor Module features throughput of up to 600 kpps, embedded hardware encryption to ensure high performance security functionality, two built-in 10/100/1000 ports and four Smart Interface Card (SIC) slots for flexible and cost-effective connectivity for the LAN and WAN. Sufficient Flash and DRAM is included to enable support for all key functionality without costly and inconvenient memory upgrades. Compact Flash and USB ports provide additional flexibility and expandability.

The MSR 50 Router Processing Module is a required component (ordered separately) for any MSR 50-40 or 50-60.

Routing engine for MSR 50 Series Multi-Service Routers.

High-performance engine with advanced security, VPN and encryption capabilities.

Next-generation routing capabilities: IPv6 and MPLS TE.

Standards-based and interoperable: IP, IPX, RIP V1/V2, OSPF, BGP-4, MPLS, integrated IS-IS (IP).

Dual software images provide resiliency.

Required for operation of the MSR 50 Series Multi-Service Routers.

For enhanced graphical management with extended functionality, 3Com Router Manager, available for purchase with 3Com Network Administrator or 3Com Network Director, is recommended. For smaller networks, graphical management of the device can be done with 3Com Network Supervisor.

Works with:
3Com MSR 50-60 Multi-Service Router Chassis Product # 0235A298
3Com MSR 50-40 Multi-Service Router Chassis Product # 0235A297

Features

Download: See the MSR 50 Series data sheet for complete specifications
WAN protocols: PPP and Multilink PPP (MP), PPPoE client and server, PPP/MP over Frame Relay, Frame Relay and Multilink Frame Relay (MFR), Frame Relay Fragmentation, compression and Frame Relay over IP, Frame Relay Traffic Shaping (FRTS), ATM (IPoA, IPoEoA, PPPoA, and PPPoEoA), DCC and dialer watch, HDLC, LAPB, X25, X25 over TCP, X25 to TCP, X25 PAD, X25 hunt groups, X25 CUG, DLSW (v1.0/2.0) ISDN, ISDN Network ISDN QSIG, MODEM
Routing: Static, RIP v1 and v2, OSPF, OSPF v3, BGP IV, IS-IS, IGMP, PIM-DM, PIM-SM, MBGP, MSDP
LAN protocols: ARP, VLAN, STP, RSTP, MSTP, transparent bridging, GARP, GVRP, Point Aggregation Technology and LACP protocol, Ethernet OAM protocol, DLDP protocol, cluster management technology, QinQ and BPDU tunnel technologies, RRRP
Security:
Port-based: PPPoE client and server, portal, IEEE 802.1X
AAA: local authentication, RADIUS, TACACS
Firewall: ASPF, ACL, filtering
Data security: IKE, IPSec, encryption (DES, AES, 3DES), portal
Other: L2TP, NAT/NAPT, PKI, RSA, SSH v1.5 and v2, SSL, URPF, GRE
VPN: GRE, L2TP, DVPN, IPSec
QoS: traffic classification, traffic policing, congestion management, congestion avoidance, traffic shaping, Frame Relay QoS, MPLS QoS, MP QoS/LFI, PPP/MoFR QoS, ATM QoS, subinterface QoS, cRTP/IPHC
Resilience: dual software images, VRRP (Virtual Router Redundancy Protocol), Backup Center, auto detect
Device management: For enhanced graphical management with extended functionality, 3Com Router Manager, available for purchase with 3Com Network Administrator or 3Com Network Director, is recommended. For smaller networks, graphical management of the device can be done with 3Com Network supervisor. Management via CLI, Telnet, SSH, reverse Telnet, console port, Rlogin, and SNMP is standard with the device.
Processor: 833 Mhz Power PC
Memory: up to 1 Gb DRAM; up to 1 Gb Compact Flash